Pink Desk Chair – Normally putting things together is a much more difficult task than breaking apart things, and it’s probably because we do not care about things as much as we break them as when we follow the instructions to put them together. Work chairs are no exception to the rule of easy disassembly. If you turn the office chair over and work from top to bottom (in this case, the upper would be the wheels), do you have it in pieces in no time
Turn the chair over so that the base is facing upwards, and see if the backrest is mounted with the base mounting. If fitted with the base, backrests will share screws with the base assembly. If it is attached to the Pink Desk Chair in the arm rests, you must remove the armrests to disassemble the seat and armrest. Pull wheels out of the base. This will require some power, but if you go hard enough, the wheels will come out. Drag the base of the telescopic base height adjustment (the leg of the chair). Again, this may require some power, depending on your chair, but it will loosen.
Remove the screws as the Pink Desk Chair divides with the backrest and the backrest will loosen. Remove the other base mounting screws to remove the bottom plate from the seat. Remove the plastic snaps on the sides of the armrest. The lid can be primed with a flat screwdriver or with the nails. Once the caps are turned off, you can see the screws that hold armrests to the seat and backrest. Remove the screws holding the armrest on the seat to remove the chair. Now the chair is completely disassembled.disassemble a pink desk chair, pink desk chair